![]() ![]() Once the plate is level secure the plate with a nut and washer, add a 1/2” hex nut and the coupler, then tighten the nuts on the leveling studs. Once the epoxy has cured, you can continue the column installation by setting the column leveling plate and adjusting the leveling studs as needed. Insert the leveling studs into the four holes on the plate and secure with a nut on both sides of the plate. While waiting for the epoxy to cure, assemble the column leveling plates. Once the rod is seated wipe any excess epoxy away from the threaded rod keeping the threads as clean as possible. Starting at the bottom, completely fill the hole with epoxy and then twist the threaded rod into the hole in a clockwise motion to fill the threads with epoxy. Proper column placement will help to ensure that your pergola will stand straight, square and look great.įor detailed instructions on column installation, be sure watch our video, Installing A Trex Pergola Column Using a Concrete Mounting Kit or Installing A Trex Pergola Column using a deck mounting kitīegin installation by drilling a 6” deep hole using a 5/8” masonry drill bit, be sure to clean all of the dust from the hole after drilling using a nylon bristle brush and compressed air. The first step installing your pergola is to properly layout the column locations. ![]() Hi, I’m Vanessa, Marketing Specialist at Structureworks, and for the next few minutes we’re going to show you the basic installation steps of a freestanding Trex Pergola on a concrete patio using our concrete mounting kit.īefore getting started, check the installation instructions that you received with your order for measurements and information specific to installing your freestanding Trex pergola. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |